Extend a conventional DMX installation, with new Ethernet protocols as ArtNet or IPX. Distribute DMX line in an easy way (cable/wireless). Obtain physical DMX lines at any point of the Lighting Ethernet System. There are two models available, for 2 and 4 DMX ports. All models can be supplied in the form of cash or rack format.

eBOX / 2 (1 Ethernet x 2 DMX)

  • Box: 47 (with legs) x 140 x 100.
  • Rack: 44 (1U) x 483 (19”) x 195.

Sizes in milimeters (width x depth x height).

eBOX / 4 (1 Ethernet x 4 DMX)

  • Box: 47 (with legs) x 280 x 100.
  • Rack: 44 (1U) x 483 (19”) x 195.

Sizes in milimeters (width x depth x height).

Extend a conventional DMX installation

The integration in the system of an Ethernet protocol as ArtNet or IPX allows to you to integrate in a conventional control lighting system elements as Media Servers (Coolux, Hipotizer, Catalyst…), 3D simulators (Capture, WysiWyg…), etc. In this mode, it’s possible to control these elements from a conventional DMX console.

Distribute DMX line in an easy way

Using a simple Ethernet cable, or using a wireless link for Ethernet transmission; it’s possible to transmit all the show DMX universes, in this way the installation can be very simple and can to make easy the access to remote or difficult points.

Obtain physical DMX lines at any point of the Lighting Ethernet System

If the lighting control is composed with Ethernet consoles, 3D simulators, Media Servers, and even DMX Ethernet dimmers and moving lights (always in ArtNet or IPX protocol), this eBOX allows to you to obtain 2 / 4 DMX physical universes to integrate in this installation other DMX conventional receivers. Receivers that doesn’t admit directly DMX over Ethernet.